Смазочный насос с ручным приводом

Смазочный насос Y-8 с ручным приводом представляет собой компактный ручной агрегат подачи масла, предназначенный для станков и отдельных видов промышленного оборудования. Он состоит из корпуса насоса объемом 500 куб. см, изготовленного из литого под давлением алюминия, удлиненной рукоятки, смотрового окошка для контроля уровня масла, латунного выпускного фитинга и встроенного фильтрующего элемента.

Насос подает смазочное масло посредством многократного приведения в действие ручной рукоятки, не требуя использования двигателя или подключения к электросети. Доступны конфигурации с одним и двумя выходами, с возможностью выбора масляных трубок диаметром 4 мм или 6 мм. Модель Y-8 подходит для штамповочных станков, фрезерных станков, оборудования с ЧПУ, технического обслуживания станков и проектов по замене оборудования, где требуется метод смазки с ручным управлением.

Получить предложение

Введение продукта

The Y-8 is a hand crank lubrication pump used to supply clean lubrication oil to machine guideways, sliding assemblies, feed mechanisms, and other designated lubrication points. It is intended for applications where periodic manual lubrication is preferred over an electrically powered lubrication unit.

The operator moves the extended handle repeatedly to actuate the internal pumping structure. Oil is drawn from the 500 cc reservoir and delivered through the brass outlet fitting into the connected oil pipe. Depending on the selected configuration, the pump can be connected to a 4 mm or 6 mm lubrication line and supplied with a single or double outlet.

A long transparent observation window allows maintenance personnel to check the approximate oil level without opening the pump body. The integrated filtering component helps reduce the entry of oil contaminants into the connected lubrication circuit. A check-valve structure in the outlet assembly helps limit oil return after operation.

The die-cast aluminum body provides a rigid enclosure for oily workshop environments, while four mounting holes allow the unit to be secured to a machine side panel or worktable wall. These structural features make the Y-8 suitable for machine manufacturers, maintenance companies, industrial distributors, retrofit specialists, and end-user factories.

Спецификация продукта

Артикул	Технические характеристики
Название продукта	Hand-Cranked Lubrication Pump
Бренд	LONGQIAO
Номер модели	Y-8
Тип продукта	Manual oil lubrication pump
Вместимость резервуара	500 cc / 0.5 L
Operating Method	Reciprocating manual handle
Pump Body Material	Die-cast aluminum alloy
Base Material	Steel; manufacturing process to be confirmed
Oil Outlet Quantity	Single or double outlets optional
Compatible Oil Pipe	4 mm or 6 mm
Outlet Fitting	Brass fitting
Outlet Direction	Left-outlet or right-outlet configuration
Oil-Level Inspection	Long transparent observation window
Filtering Structure	Built-in filter screen
Check-Valve Structure	Integrated in the oil outlet assembly
Approximate Overall Width	100 mm
Approximate Overall Height	200 mm
Mounting-Hole Vertical Spacing	110 mm, as indicated in the drawing
Mounting Holes	4 × Ø6.5 mm
Смазочная среда	Clean lubrication oil
Тип крепления	Fixed side or panel mounting
Основные области применения	Machine tools, punching machines, milling machines, CNC equipment, repair and retrofit projects
Упаковка	Защитная упаковка, пригодная для экспорта

Характеристики товара

Cast aluminum alloy body

Integrated die-casting shell, rust and impact resistant, suitable for damp and oily environments in workshops, with higher strength compared to transparent plastic models, suitable for punching machines and heavy-duty milling machines.

Long handle hand-operated pressure structure

Extended metal joystick with anti slip rubber grip, generating oil supply pressure through reciprocating shaking, stable oil output, and effortless single person operation; There are two installation styles: left oil outlet and right oil outlet.

Long strip visible oil level window

The top long transparent observation window allows for a direct view of the internal lubricating oil inventory, avoiding dry grinding of machine tool rails due to oil shortage.

Brass oil outlet joint

Standard adaptation of 4mm lubricating oil pipe, built-in one-way check valve, no oil return in the oil circuit after shutdown, maintaining continuous oil storage in the guide rail.

Bottom flange installation hole

Reserved fixing holes on both sides, which can be directly locked on the side of the machine tool or the side wall of the worktable, and installed firmly without easy shaking.

Built in filtering components

The internal filter of the fuel tank is equipped with a filter screen to filter out impurities in the lubricating oil and protect the oil circuit and slider from blockage.

Применение продукта

The Y-8 hand-cranked lubrication pump is designed for machines that require periodic and manually controlled oil supply. Its 500 cc capacity, rigid aluminum body, visible oil-level window, and flexible outlet configuration make it suitable for new machine installation, routine maintenance, and replacement projects. Final compatibility should be checked according to the machine’s lubrication requirements, pipe layout, required pressure, outlet quantity, and mounting dimensions.

Punching Machines
Станки с ЧПУ
Machining and Engraving Equipment
Machine Repair and Retrofit Projects

Упаковка, хранение, обработка и транспортировка

Упаковка

The Y-8 is prepared with protective wrapping, internal cushioning, and reinforced outer packaging according to the order quantity and transportation method. The handle, filling cap, brass fitting, and mounting sections should be protected against impact and compression.

Product model, configuration, quantity, and visible condition are checked before final packing. Consolidated packaging can be arranged when the pump is shipped with other CNC machine components.

Хранение

Store the pump in a clean, dry, and ventilated location. Keep it away from rain, corrosive gases, heavy dust, and excessive humidity.

The original packaging should remain in place before installation whenever possible. Avoid placing heavy products directly on the handle, oil-level window, filling cap, or outlet fitting.

Обращение

Handle the pump carefully and avoid dropping or collision. Do not carry the unit only by the brass fitting or filling cap.

Protect the mounting holes, outlet connection, handle, and aluminum body from deformation during warehouse handling and order consolidation.

Транспорт

Packaging can be prepared for international express, air freight, sea freight, or rail transportation. The final packing method depends on the quantity, destination, shipment method, and whether the order contains other products.