Produtos
Categorias de produtos
Produtos mais recentes
Contactar-nos
Bomba de lubrificação com massa lubrificante de 2 L
A bomba elétrica de lubrificação com massa lubrificante de 2 L é uma unidade de lubrificação centralizada compacta, concebida para fornecer massa lubrificante 000#–00# limpa aos circuitos de lubrificação de máquinas compatíveis. Combina um reservatório transparente de 2 L, um acionamento elétrico de 90 W, uma estrutura de bombagem do tipo engrenagem, um manómetro, uma porta de enchimento de massa lubrificante e um painel de controlo automático ou semiautomático.
As informações fornecidas sobre o produto indicam uma pressão nominal de 4,0 MPa e um caudal nominal de 0,5 L/min. Estão disponíveis configurações com controlo automático por temporizador, semiautomáticas, com ecrã único, com ecrã duplo e com monitorização da pressão, sujeitas à confirmação do modelo. A bomba é adequada para máquinas-ferramentas, equipamento CNC, máquinas de puncionamento, equipamento de moldagem por injeção, máquinas de embalagem e sistemas de automação industrial.
Introdução ao produto
The 2L electric grease lubrication pump is designed to supply measured grease from a centralized reservoir to designated lubrication points through connected pipes, distributors, and metering components. It replaces repeated manual grease application in compatible systems and supports more organized lubrication of guideways, bearings, sliding assemblies, transmission components, and other machine parts.
A 90 W motor drives the internal gear-type pumping mechanism. Grease is drawn from the transparent 2 L reservoir and discharged into the connected lubrication circuit. The integrated pressure gauge allows operators to observe system pressure during operation, while the transparent reservoir provides a direct indication of the remaining grease level.
The fully automatic version uses a digital controller for timed lubrication and interval operation. Semi-automatic configurations provide manual activation through the control panel. Single-display, dual-display, and pressure-monitoring versions may also be selected according to the required control method.
The product label specifies clean 000#–00# grease, a nominal pressure of 4.0 MPa, a nominal flow rate of 0.5 L/min, and 90 W power. Actual compatibility depends on the grease grade, supply voltage, pipe arrangement, distributor type, number of lubrication points, line resistance, installation dimensions, and required operating cycle.
This centralized grease lubrication pump is intended for machine manufacturers, automation integrators, equipment distributors, maintenance companies, retrofit specialists, and industrial end-user factories.
Especificação do produto
| Item | Especificação |
|---|---|
| Nome do produto | Electric Grease Lubrication Pump |
| Product Capacity | 2 L |
| Tipo de produto | Electric centralized grease lubrication pump |
| Pumping Structure | Gear-type pumping mechanism |
| Control Options | Fully automatic or semi-automatic |
| Pressure Monitoring | Optional configuration; details available upon request |
| Motor Power | 90 W |
| Nominal Pressure | 4.0 MPa |
| Nominal Flow Rate | 0.5 L/min |
| Meio de lubrificação | Clean 000#–00# grease |
| Reservoir | Transparent 2 L grease reservoir |
| Pressure Indication | Integrated mechanical pressure gauge |
| Filling Method | Top grease filling port |
| Supply Voltage | Available upon request |
| Power Frequency | Available upon request |
| Outlet Connection | Available upon request |
| Principais aplicações | Machine tools, CNC equipment, punching machinery, injection molding equipment, packaging machinery, and automation systems |
Caraterísticas do produto
Automatic or Semi-Automatic Control
The pump is available with timer-controlled automatic operation or semi-automatic manual activation. This allows machine builders and maintenance teams to select a control method that matches the equipment operating cycle and maintenance procedure.
90 W Electric Gear-Pump Drive
A 90 W electric motor powers the internal gear-type pumping mechanism. The electric drive eliminates repeated manual lever operation and supports grease delivery through a compatible centralized lubrication circuit.
4.0 MPa Nominal Pressure
The supplied product information specifies a nominal pressure of 4.0 MPa. This pressure rating should be checked against the distributor, pipe length, grease consistency, number of lubrication points, and total system resistance.
0.5 L/min Nominal Flow Rate
The stated nominal flow rate is 0.5 L/min. This provides a clear starting point for system selection, but the actual grease delivered to each lubrication point depends on the downstream distributors and metering components.
Transparent 2 L Grease Reservoir
The transparent reservoir allows operators to observe the approximate grease level during routine inspections. This helps maintenance personnel identify when the reservoir requires refilling.
Integrated Pressure Gauge
The mechanical pressure gauge provides a direct visual indication of pressure within the pump outlet area. Operators can use it as a reference during commissioning and routine operation, subject to the gauge range and system configuration.
Multiple Controller Configurations
Single-display, dual-display, semi-automatic, and pressure-monitoring versions are shown in the supplied materials. These options support different machine-control and maintenance requirements without changing the basic 2 L pump capacity.
Aplicação do produto
The 2L electric grease lubrication pump is designed for machines that require centralized and periodically controlled grease supply. It can support applications where multiple moving components need lubrication from one reservoir, provided that the pump pressure, flow, grease consistency, pipe system, distributors, and metering components are correctly matched.
-
Punching and Forming Machinery -
Máquinas-ferramentas CNC -
Injection Molding Equipment -
Packaging and Printing Machinery
Embalagem, armazenamento, manuseamento e transporte
Embalagem
Each 2L electric grease lubrication pump should be packed according to its control version, electrical configuration, and order quantity. The control panel, pressure gauge, motor, transparent reservoir, filling cap, outlet fitting, and mounting base require separate protection against impact and compression.
Protective film, foam cushioning, inner cartons, and reinforced outer cartons may be used to prevent movement inside the package. For bulk orders or long-distance sea transportation, additional pallet or wooden-case protection can be arranged according to the confirmed shipping requirements.
Before packing, the product model, reservoir capacity, automatic or semi-automatic configuration, display type, voltage specification, quantity, and supplied accessories should be checked.
Armazenamento
Store the pump indoors in a dry, clean, and ventilated area. Keep it away from rain, high humidity, corrosive gases, metal dust, direct sunlight, and heat sources.
The pump should remain upright during storage. Do not place heavy cartons or equipment on the pressure gauge, controller, filling cap, or transparent reservoir. Keep the outlet connection and filling opening covered to prevent dust and foreign material from entering the grease circuit.
For extended storage, retain the original protective packaging and inspect the electrical components, reservoir, fittings, and external surfaces before installation.
Manuseamento
Lift and move the pump by supporting its metal mounting base or main body. Do not carry it by the pressure gauge, electrical cable, control panel, filling cap, outlet fitting, or transparent reservoir.
Avoid dropping, overturning, collision, and strong vibration. Special care should be taken to prevent damage to the pressure gauge and deformation of the outlet connection.
When handling multiple units, use suitable cartons, pallets, or lifting equipment according to the total package weight. Do not drag unpacked pumps across the floor.
Transportes
The pump can be prepared for international express, air freight, sea freight, or rail transportation. The final packaging method depends on the order quantity, destination, transport route, and whether the shipment includes other lubrication-system components.
Packages should remain upright and securely fixed during transportation. Heavy products should not be stacked directly above the controller, gauge, or reservoir area.
Before shipment, LONGQIAO checks the model, control configuration, voltage information, quantity, accessories, visible condition, and packaging status. Exact package dimensions, gross weight, and units per carton are available after the final order configuration is confirmed.
-
Embalagem segura para exportação -
Manuseamento cuidadoso e inspeção das encomendas
